[Specification]

DIMENSIONS (HxWxD) : 463mm x 674mm x 572mm (18.23″ x 26.55″ x 22.50″)
DIMENSIONS : 28.27″ w x 18.23″ h x 22.50″ d (718mm x 463mm x 572mm)
(w/rigging)
weight : 133lbs (60.32Kg);with rigging,164 lbs (74.38 Kg)
Enclosure : Premium birch plywood
Finish : Black textured , hard – shell
Protective Grille : Powder – coated , hex – stamped steel with black mesh screen
Rigging : Optiona Quickfly MRF-500 rigging frame for arrays with M’elodie curvilinear loudspeakers;
rigging frame also compatible with MG-M’elodie multipurpose grid; integral 1-1/2″(38mm)
pole-mount receptacle on top

[Specification]

System : 2 Way Passive
Frequency Response : 60Hz ~ 20KHz
components : One driver-75mm(2inch troat), one of 12inch woofer
Power handling : Driver-75watts , Woofer-500Watts 1
Sensitivity : 98dB
Impedance : Driver-16chms, Woofer-8ohms
Max SPL : Peak-133dB/RMS-127dB
Coverage pattem : Vertical-90defrees , Honizontal-90degrees
input connector : 3 NL4MPR (from Neutrik)3
Dimensin : 515mm W x 346mm H x 361mm D
finish : Texture uretane
Enclosure shape : Wedge monitor shape
Welght
Enclosure typs : Vented box
Rigging system : 8mm 1 bolt
Rigging limits
Options : Finish colour / Soft cover / input connector
Hi crossover frequency : 1200Hz
Hi crossover slope : 24dB butterwoth
Amplifier : 1000Watts at 8ohms
Passive ntwork : One of Teardrop
Euclosure : Exterior glus 15mm Finland birch plywood
gnille : Foam sponge and steel gnille
Warranty : 5years
Spares and accassories : 5312-LF loudspeaker
RK5312 Reconkit for 5312
1750ZT-Replacement diaphragm for 651ZT

[Specification] – System : 2 Way Passive
– Frequency Response : 70Hz ~ 20KHz
– components : One driver-44mm(1inch thiat), one of Binch woofer
– Power handling : Driver-45watts , Woofer-200Watts 1
– Sensitivity : 98dB
– Impedance : Driver-16chms, Woofer-8chms(each)
– Max SPL : Peak-125dB/RMS-119dB
– Coverage pattern : Vertical-90defrees , Honizontal-90degrees
– input connector : male and female NL4MPR (prom neutink)3
– Dimension : 260mm W x 680mm H x 400mm D
– finish : Texture urethane
– Enclosure shape : Trapezidal
– Welght
– Enclosure typs : Vented box
– Rigging system : 8mm 1 bolt
– Rigging limits
– Options : Finish colour / Soft cover / input connector
– Hi crossover frequency : 2500Hz
– Hi crossover slope : 18dB butterwoth
– Amplifier : 400Watts at 8ohms
– Passive ntwork : installed
– Enclosure : Exterior glus 15mm Finland birch plywood
– gnille : Foam sponge and steel gnille
– Warranty : 5 years
– Spares and accessories : 5208-LF loudspeaker
– RK5208W Reconkit for 5208
– 1450ZT-Replacement diaphragm for 450PB

[Specification]

Switchable RF power (10/50mW or 10/100mW, regionally dependent)
Durable, lightweight magnesium construction (3.25 oz / 94 g)
Frequency and power lockout
Bit-mapped backlit LCD display
2AA Batteries provide up to 8 hours continuous use
Infared automatic transmitter sync
Removable antenna

[Specification]
– CEW™ technology
– Trapezoidal cabinet
– Rotatable HF waveguide
– High power handling
– Pole mount socket
– Omnimount™ compatible

[Specification]
– 2.1-channel PC speaker
– Rated output 40W
– Headphone jack,
– Microphone jack, RCA jack, support
– Bolryung adjustment

[Specification]

Frequency Response (1W@1m) : (+/-3dB) : 80Hz ~20KHz
(-10dB) : 70Hz ~ 22KHz
Axial Sensitivity (dB SPL, 1W@1m) : 97
Impedance(Ohms) Full Range : 8
Power Handling RMS/PROGRAM/PEAK(Watts) : 250/500/1000
Calculated Maximum Output : Full Range peak : 115
Full Range Long Term : 110
Nominal Coverage Angle/-6dB points(Degrees) : Horizontal : 90
Vertical : 90
System configuraeion : Tow-way full range
Powering : Passive(LF/HF crossover) : LF subsystem : 10″Woofer x 1
HF subsystem : 1.4HF system protection circuit / Ferrofluid coolant
Enclosure Materials : High intensity 15mm wood
Finish / color L water resistant textured black paint
Connectors : NL 4 Speakon x 2
Hardware : Bottom : SPK Stand Ple Socket
Rear : Suspend Point x1
Right/Left : Suspend Point x2
Grille : Power coated perforated steel, foam backed
weight : net – 11.9kg , gross – 13.7kg
DIMENSIONS (WxHxD) 12.6″ x 20.4″ x 11.8″ (320mm x 517mm x 300mm)

[Specification]

Input Impedance 1 mOhm (pad at 0dB), 47 kOhm (pad at -20dB or -40dB)
Max Input +9dBu (pad at 0dB), +29dBu (pad at -20dB), +49dBu (pad at -40dB)
Input Connectors Two Parallel 1/4″ jack connectors (Tip Hot +ve, Sleeve ground), and a parallel XLR connector (unbalanced) (Pin 2 Hot +ve, Pin 1 & 3 ground)
Output Transformer Balanced
Max Output +8dBu into 600 Ohms or greater
Output Connectors XLR3-32 or equivalent
THD < 0.005% at 1khz, 0dbu output
Noise < -105db unweighted, 22hz-22khz, rms*
Frequency Response 30Hz to 20kHz, +0dB/-1dB
Main/Standby battery 9 volt PP3 type, preferably alkaline
Power Consumption on phantom: less than 7.5mA, on battery: less than 2mA.
Phantom Power +20 volts DC to +48 volts DC
Unit Weight 650 gms, excluding batteries
Dimensions 59 mm x 124 mm x 143 mm (2.3″ x 4.9″ x 5.6″)

[Specification]

Frequency Response 50~17,000 Hz
Polar Pattern Cardioid / SuperCardioid / Omnidirectional
Output Impedance (at 1,000 Hz) Rated at 150 Ω (180 Ω actual)
Open Circuit Sensitivity 1kHz일 때, ref. 1 V per Pascal*
Cardioid : -33.5dBV (21.1mV)
Supercardioid : -32.5dBV (23.7mV)
Omnidirectional : -28.0dBV (39.8mV)
* 1 Pascal=94 dB SPL
Maximum SPL (1kHz at 1% THD, 1 kΩ load)
Cardioid: 123.0 dB
Supercardioid: 122.0 dB
Omnidirectional: 117.5 dB
Equivalent Output Noise (A-weighted)
Cardioid: 29.0 dB SPL
Supercardioid: 28.0 dB SPL
Omnidirectional: 70.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL)
Cardioid: 65.0 dB
Supercardioid: 66.0 dB
Omnidirectional: 70.5 dB
Dynamic Range with 1 kΩ load 94.0 dB
Common Mode Rejection 45.0 dB minimum
Mute Switch Attenuation 50.0 dB minimum
Preamplifier Output Clipping Level (1% THD) -6.0 dBV (0.5 V)
Power Requirements 11 to 52 Vdc phantom, 2.0 mA
Weight 0.82 kg net, 1.64 kg packaged

[Specification]

*Type : Dynamic
*Frequency Response : 40 to 15,000 Hz
*Polar Pattern Cardioid Sensitivity (at 1,000 Hz Open Circuit Voltage)
– 56.0 dBV/Pa (at 1,000 Hz) Impedance Rated impedance is 150 ohms (300 ohms actual) for connection to microphone inputs rated low impedance
*Connector Three-pin professional audio connector (male XLR type)
*Produced : 1965-present

[Specification]
– Switchable RF power
– Frequency and power lockout
– Bit-mapped backlit LCD
– 2AA batteries — up to 9.5 hours continuous use
– Infrared automatic transmitter sync
– All metal die-cast construction
– Interchangeable cartridges: SM58, SM86, SM87A, Beta 58A, Beta 87A, Beta 87C, KSM9, KSM9HS, and VP68