Operating Frequency Range : 70 Hz – 18 kHz
Frequency Response : 76 Hz – 16 kHz +/- 4 dB
Maximum Peak SPL: 131 dB
Coverage : Horizontal: 100 degrees
Vertical: Varies, depending on array length and configuration
Crossover : 1100 Hz
Low/Mid Frequency (front) : Two 8″ cone drivers with neodymium magnets
Nominal impedance: 4 Ohm
Voice coil size: 1.5″
Power-handling capability: 600 W (AES); 900 W peak
High Frequency : 3″ compression driver
Nominal impedance: 8 Ohm
Voice coil size: 3″
Diaphragm size: 3″
Exit size: 1.2″
Power-handling capability: 180 W (AES); 360 W peak
Amplifiers : Type: 3 Channel Complementary MOSFET output stages (class AB/H)
Ouptut Power: 1275W (3 Channels ; 2 x 500 W, 1 x 275 W)
THD, IM, TIM: <0.02%
Load Capacity: 4 Ohm Low/Mid and 8 Ohm High Channels
Cooling: Convection
Audio Input : Type: differential, electronically balanced
Connector: XLR Female with XLR Male loop output.
Input Impedance: 10 k Ohm differential between pins 2 and 3
AC Power : Connector: PowerCon with looping output or VEAM
Automatic Voltage Selection: Automatic, two ranges, each with high-low voltage tap (uninterrupted)
Current Draw : Idle: 0.680 A rms (115 V AC); 0.360 A rms (230 V AC); 0.760 A rms (100 V AC)
Max. Lomg Term: 2.3 A rms (115 V AC); 1.2 A rms (230 V AC); 2.6 A rms (100 V AC)
Burst Current: 4 A rms (115 V AC); 2A rms (230 V AC); 4.5 A rms (100 V AC)
Ultimate Short-Term: 13A pk (115 V AC); 6.5 A pk (230 V AC); 15 A pk (100 V AC)
Inrush: 10 A rms at 115 V AC, 18 A rms at 230 V AC
Dimensions : 28.54″ w x 9.19″ h x 12.75″ d (724.84 mm x 233.31 mm x 323.85 mm)
Weight : 62 lbs (28.12 kg)
Enclosure : Premium birch plywood
Finish : Black textured
Protective Grill : Powder-coated hex stamped steel